Dip Pen Nibs - Myers Post

Quill nibs


1.jpgThe tubular design for the crow-quill has been in existence since metal pencils had been very first introduced en masse within the 1820s.

When comes up a crow-quill nib, it is easy to envision good detailed architectural renderings, retouching old pictures, cross-hatching shadow areas of pen-and-ink drawings. When the crow-quill was introduced well over a hundred years ago, it was indeed created for draftsmen and lithographers who used it for good work on printing dishes. They're great for retouching wide pen lettering and.

The versatile crow quill, able to make the best possible hairlines and dense tones, is a wonderful pen for both copperplate and spencerian/ornamental scripts. They're since fine as a mapping pen and hold even more ink. A whole lot more ink! Fortunately there are a number of exceptional crow quills made today.

The tubular design associated with crow-quill goes back toward dawn for the steel-pen within the 1820s. Originally, metal pencils had been designed to fit over a round, straight holder, often manufactured from timber. Within about a decade, the slip nib ended up being introduced, so-named given that it had been designed to “slip” into a slot in a straight holder or even the flange of an oblique pen staff. Slip nibs would be the pens we are many knowledgeable about.

As slide nibs became standard, the tubular design was not forgotten. It shrank into the crow quill design also ballooned into some novelty pencils when you look at the 1880s. These second pens, while good to check out, are not simple to compose with. Since the pens are long—upwards of four inches in length—the hand must grasp the smooth material. Consequently, the pen has a tendency to fall and it is difficult to get a handle on. The novelty pen fad had been brief.

The initial tubular pencils were designed to be fitted over wooden manages. Both of these date from about 1840.

If you see any tubular nibs on Ebay, take care not to confuse all of them with larger nov- elty pens of seemingly similar design that were a trend circa 1880 and often employed for promo- tional functions. At left is a mod- ern Hunt 102 crow-quill, scarcely an inch very long. To its right is a tubular pen from Mark Winkley, a stationer and printer from Lon- don. At far appropriate is a Gillott Swan Quill, a monster of a pen at significantly more than four inches in length.

Nibs and More Nibs

Crow quills made these days are superfine and intensely versatile. They're well suited for copperplate and spencerian style script. There are numerous exceptional pens to pick from. With the exception of the search 107 Hawk Quill, that is really stiff, all exhibit similar superfine and versatile qualities.

Vintage crow quills are not simple to find. Hardly ever do they appear on Ebay and those i've discovered were mainly mixed loosely into various other nibs. The gallery of nibs that employs presents my very own collection. When I notice more, i'll pass all of them on. Any user who's a crow quill not discussed the following is thank you for visiting send me someone to review. We'll all benefit.

Search 102, 107 & 108. The 102 could be the best and most flexible of this trio. The 108, virtually as fine and versatile, is bigger and effective at broader colors. At the center may be the 107 Hawk Quill, very rigid, but good. Each is however made.

Two crow quills from Gillott. Kept is the 850 extended Shoulder, a superb and versatile nib similar to the search 108. It's not any longer supplied. The Gillott 659 Lithographic Crow Quill has existed for quite some time. Extremely good and super flexible, it's fantastic for copperplate and spencerian type script.

The present day Brause 515 could be the largest crow quill within group at one and another- one-fourth ins. It is probably most like a frequent slide nib in that featuring its size, it offers side slits for added mobility and will hold a voluminous number of ink. Its good to medium point is very good for script writing.

Two vintage crow quills from Esterbrook, the #61 and #62. For composing script, the 62 is most likely well. It is very like the Gillott 659. The 61 is comparable to an excellent mapping pen and it is therefore fine that it will be hard to write with. These pens are not any longer made as Esterbrook happens to be gone for almost half a century.

Soennecken’s two classic crow quills tend to be fantastic writers. The more expensive 140 is probable the best for copperplate and spencerian script as it can produce a thicker shade, however the smaller 141 is very great by itself.

Kueffel and Esser is certainly a provider of drafting materials. Their old #3200, not any longer supplied, is a wonderful blogger.

Penholders

Originally, crow quills were meant for straight penholders. Unlike other tubular nibs, crow quills fit of their holders. They've been a standard circumference for years so crow-quill holders made a century ago will fit nibs made yesterday.

For writing script, most article writers will need an oblique penholder. There's only 1 made these days which is the PIA holder from Paper & Ink Arts.

The PIA penholder from Paper & Ink Arts. Note the curved portion of the flange. See arrow above. Crow quills fit here. Presently, this is the just oblique penholder designed for crow quills.

Create Your Personal Oblique Penholder For Crow Quills

The PIA oblique holder has actually a right shaft and several pointed pen advocates choose a pen staff with contours similar to those provided for slide nibs. Presently, there are none available, but it is simple to make one of the very own. It shouldn’t just take over about ten minutes to manner.

What you will require is an oblique pen-holder with a brass flange. A plastic Peerless-type owner is enough. Additionally, you will need some tiny screwdrivers such as those utilized by jewelers, and a set of needle-nosed pliers. The screwdrivers (see Figure 1) are easy to get a hold of and you will need the littlest into the dimensions in which the shaft is equal wide to that particular of the crow quill. Use the slot variety.

Within example, I utilized a Mike Sull oblique holder. Starting with the smallest screwdriver, work it into the flange such as Figure 2. Insert the shaft associated with screwdriver completely. Repeat this before you achieve the scale that's equal in width compared to that for the crow-quill. Today try to put the nib. Work the screwdriver to enlarge the hole through to the nib meets snugly.

When the nib is within, gently squeeze the flange per the arrows in Figure 3 to set the nib in position. Don't pinch also tightly. You might distort the nib with excessively force and damage the point. Simply tight sufficient so the crow-quill does not go while you compose. If you have achieved the period, you will be willing to write.



Share this article





Related Posts


Waterman Pencils
Waterman Pencils
Waterman Canada
Waterman Canada
Waterman blue-black
Waterman blue-black

Latest Posts
Fountain Pen Classifieds
Fountain Pen…
Component 2: Make A Categorized. Please…
Sheaffer Gold
Sheaffer Gold
Our company is thinkers of 100% pleasure…
Manuscript nibs
Manuscript nibs
Nib types: We produce a wide variety…
Who is Mont Blanc?
Who is Mont Blanc?
In its Villeret 1858 collection, Montblanc…
Fountain Pen website
Fountain Pen…
The initial record of a reservoir pen…
Search
Featured posts
  • Waterman Pencils
  • Waterman Canada
  • Waterman blue-black
  • Waterman Pens India
  • Waterman Paris France
  • Waterman Hemisphere Fountain Pen
  • Old Waterman Pens
  • Pens Waterman
  • Waterman Pens Australia
Copyright © 2018 l www.fountainpenbiz.com. All rights reserved.