Bottled ink for fountain Pens
WHAT EXACTLY IS A CONVERTER?
A converter is a suction tool with an ink reservoir that permits you to definitely utilize any bottled ink. It could be attached to your fountain pen just like a cartridge. However, to be able to utilize a converter, your fountain pen:
1. Must have a cartridge-converter completing method.
2. Must be suitable for the converter.
Why don't we unpack those two demands. Every water fountain pen features a completing device, or way of attracting and keeping ink. The many filling components are: cartridge, cartridge-converter, piston, eyedropper, and vacuum cleaner. Cartridge pens just take ink cartridges, piston pencils have actually an integral piston that transfers ink right from the nib to the reservoir, eyedropper pens tend to be filled utilizing an eyedropper, and so forth. Cartridge-converter water fountain pencils are the most frequent, and certainly will make use of both ink cartridges and converters, according to your choice.
Now, assuming that you've got a cartridge-converter fountain pen, you need to pick the best converter because of it. All of our converters are displayed right here, and specific converter pages list the fountain pens they truly are appropriate for. For a good example, the Lamy Z24 Converter works well with all Lamy Safari, Al-Star, and Vista water fountain pens. Typically, the converter needs to be the same brand name as the water feature pen - you would not utilize the Lamy Z24 Converter for a Pilot water fountain pen.
UTILIZING A PISTON CONVERTER
Supplies required: Fountain pen, converter, container of ink.
1. Push the atmosphere out of the piston converter by turning it counterclockwise.
2. Take away the cap for the fountain pen and unscrew the nib from the barrel.
3. Push the converter to the water feature pen nib until it feels protected
4. Draw ink from container by submerging the nib of water fountain pen and turning the converter clockwise to suction up ink.
5. Twist the converter counterclockwise to force air out from the converter. This will force atmosphere bubbles from the converter and maximize the total amount of ink drawn into the water feature pen.
6. Repeat Step # 4 to suction up more ink.
7. Reassemble your fountain pen with all the converter inside.
When you have trouble filling the converters that way, you can also get rid of the converter from the pen, transfer ink to it with an eyedropper, and re-attach the converter into pen if it is complete.
The Lamy Z24 Converter and Lamy Z26 Converter both have actually a maximum capability of approximately 0.6 mL, which is around half the capacity of a Lamy ink cartridge. The Z24 can be utilized for the Lamy Safari, Vista, Al-Star, and Joy, although the Z26 works using the Lamy Logo, Studio, and CP1.
Once again, there are two options: the Pilot CON-20 Converter in addition to Pilot CON-50 Converter. Both hold no more than about 1 mL and make use of most Pilot water feature pens, like the Prera, Capless, Metropolitan, Penmanship, Plumix, Vanishing Point, and Lucina. The key distinction between both converters is the method of attracting ink, with the CON-20 using a bladder "press" procedure (see tutorial here) as well as the CON-50 using a piston "angle" system.
The converter is just one of several approaches to fill a fountain pen. You may want to switch back again to ink cartridges, transform your water fountain pen into an eyedropper pen, or purchase a piston filler like the Lamy 2000. It all is dependent on exacltly what the concerns are, and whether you value capacity, shade choices, or convenience most.